首 页 加入收藏 商务服务 在线咨询

求购信息 找产品 企业库 行业资讯 技术专区 展会信息 专业人才
格翎(上海)环境科技秒速时时彩
主营产品:蒸发器,结晶器,杀菌设备,提取设备,果汁生产线,多功能提取浓缩设备
会员级别 免费会员  收藏此公司 
首    页
求购信息
产品供应
公司简介
人才招聘
在线咨询
联系方式
  联系方式  

地址:上海市奉贤区金碧路(金汇)585号企福科技园2号206座
电话:021-31781287
传真:021-51951564
手机:18016229110
联系人:李先生

 
 
您现在的位置:格翎(上海)环境科技秒速时时彩 >> 产品展示 >> 混合设备 >> 结晶罐
  结晶罐  
产品名称: 结晶罐
产品编号: GLJJ
产品商标:
产品规格: 300-5000L
参考价格: 5000
更新日期: 2018/5/12 8:58:53
被阅次数: 1184次
 
  详细说明  

                                结晶罐 Crystal Tank

1、概述:

    结晶罐是用于待结晶物料的浓度达到了过饱和的高浓度,而且该物料的溶解度随着温度的变化而变化的,物料在罐内在夹层冷冻水或冷媒水冷却急剧降温的结晶设备,罐体内高精度抛光,以及罐体内清洗无死角的要求来满足工艺使用条件,其它关键环节在于夹层面积的大小,搅拌器的结构形式和物料出口形式等。广泛用于制药、食品、化工、生物等工业中物料搅拌混合,降温冷冻,成品结晶。 本公司对不同的工艺要求,具有丰富的设计和制造经验,所生产的设备完全符合GMP验证要求。

2、设备结构

    结晶罐采用进口316L或304不锈钢制作,内壁采用电解镜面或机械抛光,外壁采用304全焊接结构保温,外表面采用镜面或亚光处理。结晶罐上安装0.2μm疏水性通气过滤器。结晶罐能承受121℃高温灭菌消毒,配备卫生级压力表。

罐体对外连接口采用卫生快开接头,带有温度监控装置、视镜、清洗球及氮气进口、PH计接口、温度计接口等,搅拌电机连接口轴的密封采用特殊的卫生级机械密封,以确保物料不受污染。结晶罐可采用变频调速装置,搅拌轴转速调节范围大。

3、设备特点

1)、设备选用中空螺带式搅拌结构可增大换热面积,提高换热效率,提升结晶产能,且进料出料方便;

2)、设备夹套内可通入蒸汽或冷媒以使物料处于*佳温度下,具有效率高,操作方便等优点;

3)、设备上安装 0.2 μm 疏水性通气过滤器,罐内能承受高温蒸汽灭菌消毒,配备卫生压力表;

4)、设备罐体外采用卫生级快开接口,配备有温度计,视镜、灯镜、清洗球及氮气进口等;

5)、设备密封采用特殊的卫生级机械密封,确保物料不受污染;

6)、设备采用无级调速装置,搅拌轴转速调节范围大,搅拌均匀,结晶体均匀;

7)、设备出料采用气动罐底阀,可以保证各种晶浆出料顺畅无阻。

 

1, overview:

The crystallizing tank is used for the concentration to be crystallized material reached high levels of supersaturation, and the solubility of the material with the temperature changes, the material in the inner interlayer tank crystallization equipment of chilled water or chilled water cooling and rapid cooling tank, high precision polishing, and clean the tank body to meet the requirements of the process conditions of use, the other key is the mezzanine area size, structure and material outlet stirrer form. Widely used in pharmaceutical, food, chemical, biological and other industries, mixing, mixing, cooling, freezing, crystallization of finished products. Our company has rich experience in design and manufacturing for different process requirements, and the equipment produced is in full compliance with the requirements of GMP certification.

2, equipment structure:

The crystallizer is made of imported 316L or 304 stainless steel, and the inner wall adopts electrolytic mirror surface or mechanical polishing. The outer wall adopts 304 full welded structure to keep warm, and the outer surface is mirror or matt. A 0.2 M hydrophobic vent filter is installed on the crystallizer. The crystallizing pot can withstand sterilization at 121 DEG C, and is equipped with a sanitary pressure gauge.

The external connector adopts quick open joint health, with the temperature control device, mirror, cleaning ball and nitrogen inlet, pH, thermometer interface interface, motor shaft sealing stirring connector adopts sanitary mechanical special sealing, to ensure that the material is not contaminated. The crystallizer can adopt frequency conversion speed regulating device, and the speed range of the stirring shaft is large.

3, equipment features:

1) the equipment adopts the hollow spiral ribbon mixing structure, which can increase the heat exchange area, increase the heat exchange efficiency, improve the crystallization capacity, and the material is convenient to discharge;

2) the steam or cooling medium can be used in the equipment jacket, so that the material is at the optimum temperature, and the utility model has the advantages of high efficiency and convenient operation;

3) the equipment is equipped with 0.2 M hydrophobic filter, the tank can withstand high temperature steam sterilization, and equipped with sanitary pressure gauge;

4) the device can be used as a sanitary quick opening interface in vitro. It is equipped with thermometer, mirror, lamp mirror, cleaning ball and nitrogen inlet etc.;

5) the sealing of the equipment adopts special sanitary mechanical seals to ensure the material is free from pollution;

6) the equipment adopts stepless speed regulation device, the speed range of the stirring shaft is large, the stirring is even, and the crystal body is even;

7), equipment dircharging pneumatic tank bottom valve, can guarantee all kinds of crystal slurry discharge smoothly.

4、设备规格:Parameter

 

型号规格

Name

 Model

300L

500L

1000L

3000L

5000L

直径Diameter

800

950

1250

1500

1800

高度

Height

600

750

1000

1750

2000

人孔Manhole

Φ300

Φ350

Φ350

Φ400

Φ400

视镜

Mirror

Φ100

Φ100

Φ100

Φ125

Φ125

接口

Port

DN40

DN40

DN50

DN65

DN65

阀门

Valve

DN40

DN40

DN50

DN65

DN65

功率

Power

1.5kw

3.0kw

4.0kw

5.5kw

7.5kw

转速

Speed

16-100r/min

16-100r/min

16-100r/min

16-100r/min

16-100r/min

温度

Tem.

-10℃~70℃

-10℃~70℃

-10℃~70℃

-10℃~70℃

-10℃~70℃

 

免责声明: 以上所有信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。制药机械技术网对此不承担任何保证责任。
 
关于我们 | 联系我们 | 本站公告 | 服务条款 | 网站帮助 | 商务服务 | 法律声明 | 法律顾问 | 友情链接 | 在线咨询 | 网站地图
Copyright © 2004-2020 制药机械技术网 版权所有    增值电信业务经营许可证 苏B2-20110228
秒速时时彩平台 北京赛车高倍率平台 秒速时时彩平台 秒速时时彩 秒速时时彩 华盈彩票网 秒速时时彩 北京赛车彩票 福利彩票北京赛车 北京赛车彩票